Galvanized Steel Composite Panel https://www.alubang.net/product/galvanized-steel-composite-panel.html
is a heat preservation composite maintenance panel formed by compounding steel panels or other panels, bottom panels and heat preservation core materials through adhesives. For the production process of the composite panel production line, we must first select composite panels in the market:
1. Select the panel of galvanized steel composite panel (material color coated panel, galvanized panel, stainless steel panel, etc.)
Select the galvanized steel composite panel that meets the customer's requirements. Make clear the variety, model and color consistency of materials. Attention should be paid to the selection of panels, to ensure that they are free from spot scars, warpage, trachoma, sag, stain, etc. If the wool panel cannot see the effect, the panel can be made after spraying the panel with a water gun.
2. Pre-panel compounding process
In case of polished surfaces plus mesh panel, it shall be carefully selected and then sent to the hand mill for polishing. According to the flatness, it shall be polished, dried and leveled, but not deep ground. Then fold off the mesh cloth and level off the glue on the surface. If the glue cannot be removed, put on a hand grinder to grind off the glue on the surface of the mesh to ensure the smoothness of both sides and remove dust from the dry ground panel.
3. The process before the bottom panel is compounded
For the base panel with luminosity, the thickness shall be set after the light is removed. Usually, the thickness of 20mm base panel shall be set at 17 mm. Remove water after the thickness of the bottom panel is fixed. Can be pulled outside to dry, dry or blow-dry, pay attention to the panel is not dry can't glue, avoid delaminating or not firm.
4. Gluing and compounding the composite panel
Check whether the panels and bottom panels of the composite panel production line are completely dry, and pick out the panels containing moisture. Adjust the glue, adjust the glue and calcium carbonate evenly, and adjust the toner to be basically the same as the color of the panel.
ALUBANG was certified with ISO9001 in Quality Management Systems, ISO14001 in Environmental Management Systems, OHSAS18001 for Occupational Health and Safety certification. ALUBANG is the industry standard and national standard drafting unit for aluminum composite panels, aluminum honeycomb panels and aluminum corrugated panels and aluminum solid products. For more product details, please click on our official website: https://www.alubang.net/