Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/
processing is a very precise process, which includes many knowledge points of disciplines, so care should be taken to avoid causing some products to be defective.
1. Different materials require different temperatures during injection moulding. Too high or too low a temperature will have a bad effect on the processing of the materials, and will have an adverse effect on the production of finished products. For example, if the temperature is too low, some abnormal conditions will occur to the color of liquid materials. If the temperature is too high, the product will have burr appearance after being produced, and the output and quality cannot meet the requirements.
2. During the injection moulding process, it is necessary to carefully control the speed inside the runner. It is assumed that burrs will appear too soon, which will also lead to over-filling and scorching. It is assumed that too slow will result in shrinkage appearance and brief cracking. Therefore, it is necessary to carefully control the processing speed during the casting process so as to ensure the quality of the products produced reaches the requirements.
3. During the injection moulding process, it is necessary to carefully control the cooling time. The time required in detail also needs to be selected according to the details of the processed products. The cooling time will have a greater impact on the brightness marked by the finished products during the processing of furniture mould, so it is necessary to pay more attention.
If you are interested in our products, you can click Dustbin Mould https://www.furnituremould.com/
to learn more information.