Author Topic: How to Judge the Quality of ECCA Wire  (Read 52 times)

xiuweetime

  • Новичок
  • *
  • Posts: 7
    • View Profile
    • Email
How to Judge the Quality of ECCA Wire
« on: 15 November 2019, 05:17:15 »
The quality of ECCA Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ depends to a great extent on the quality of raw materials such as paint and wires and the objective conditions of machinery and equipment. However, if a series of problems such as baking, annealing and speed are not taken seriously in operation and their interrelations are not understood, operation technology is not mastered, tour work and parking and finishing work are not done seriously, and process sanitation is not done well, even if the objective conditions are better, high-quality ECCA wire cannot be produced. Therefore, the decisive factor for making ECCA wire well as a human being and human being's sense of responsibility for work.

First of all, before starting the catalytic combustion hot air circulation enamelling machine, the fan should be started to make the air in the furnace circulate at a slow speed. Preheating the hearth and the catalytic zone by electric heating to make the temperature of the catalytic zone reach the prescribed light-off temperature of the catalyst. Secondly, in the production operation of ECCA wire, the ECCA wire should also pay attention to the problems of explosion and fire.

There are several situations of burning: first, the whole furnace is completely burned, which is often caused by the over-high steam density or furnace temperature in the cross section of the furnace; Second, when threading, too much paint was applied to several wires, causing several wires to catch fire. In order to prevent fire, the process furnace temperature must be strictly controlled and the furnace must be ventilated smoothly. Then, the finishing work after parking mainly refers to cleaning the old glue at the furnace mouth, cleaning the paint cylinder and guide wheel, and doing a good job in the environmental sanitation of the ECCA wire and the surroundings. In order to keep the paint tank clean, if not working, the paint tank should be covered with paper to avoid the introduction of unclean things.

If you are interested in our products, you can click Varnish Wire http://www.xinyu-enameledwire.com/product/enameled-rectangular-copperaluminum-wire/ to learn more information.