Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Jialongye

Pages: [1] 2
1
As a kind of "inexhaustible and inexhaustible" safe and environmentally friendly new energy, solar energy has received more and more attention. As an ideal road lighting fixture, solar garden lights are widely used to illuminate humans at night with the improvement of people's lives and the continuous development of society. The reason why solar garden lights are becoming more and more popular nowadays, the following, China Solar Lights Suppliers introduces the three innovations of solar lights:

1. Energy saving and environmental protection

Because solar garden lights are also a kind of solar street lights, energy saving and environmental protection are the characteristics of solar products. It uses natural light sources, does not need to consume electricity, and is inexhaustible. For our current environmental crisis, it is a product that meets the requirements of green environmental protection, pollution-free and non-radiation, so that our impression of solar garden lights is getting better and better.

2. High tech gold content

The core device of the solar garden light is an intelligent controller. The controller has been set up 24 hours a day to automatically adjust the brightness of the sky and the brightness that people need in various environments. This smart device is very convenient. It can help us automatically adjust the state of solar garden lights, and can also check the state of solar garden lights.

3. Easy to install, safe and reliable

Solar garden lights do not need to dig pits and bury cables, and the installation steps are very convenient, almost fool-like installation, and maintenance is also very convenient. Moreover, the solar garden light uses a battery to absorb solar energy and converts it into light energy through low-voltage direct current, which is a safe power source.


Through the above introduction, China Landscape Light Manufacturers hopes that you can simply refer to the content of this article in future use.

2
Because the wall lamp is exquisite, compact and warm, it attracts many people to buy it first. Some people like to install wall lamps on the balcony, some people install wall lamps in the sun room on the roof, and some people install wall lamps in the room. It can be said that wall lamps can be seen everywhere. One of the more environmentally friendly and energy-saving is the solar wall lamp. , China Solar Lights Suppliers introduces how to maintain solar wall lights?

1. Do not hang objects, such as drying quilts, on the solar garden lights. Frequent switching will greatly reduce its service life, so when using the lamp, it is necessary to reduce the switch of the lamp as much as possible. If the lampshade is found to be tilted during use or cleaning, it should be corrected by hand to keep it beautiful. When adjusting the lampshade, pay attention to avoid the three-pronged bracket in the lamp reflecting dark shadows when the lamp is on.

2. Replace the aging lamp tube in time according to the light source parameters provided by the sign. If the two ends of the lamp tube are red, the lamp tube is black or dark, or the lamp does not light up, the lamp should be replaced in time to prevent the ballast from burning out. Wait for insecurity.

Through the above introduction, China Landscape Light Manufacturers hopes that you can simply refer to the content of this article in future use.

3

Household wall lamps are generally installed in entrances, corridors, mirrors, bedsides, etc., while wall lamps in public places are generally installed in places such as stairs, halls, and corridors. When installing the wall lamp, you need to pay attention to the height range of the wall lamp, which should be slightly beyond the line of sight. Below, China Solar Lights Suppliers introduces what is the installation height of the wall lamp?

1. The installation height of wall lamps in corridors and corridors should be slightly higher than the eye level by about 1.8 meters, that is, the distance from the ground is 2.2 to 2.6 meters.

2. If it is a wall lamp in a working environment, the distance from the desktop is 1.4~1.8m, and the wall lamp at the bedside of the bedroom is about 1.4~1.7m from the ground.

3. The distance between the wall lamp and the wall is about 0.09~0.4m.

4. It can be seen that the height of the wall lamp is best to be confirmed according to the purpose and installation place of the wall lamp, and the effect of the wall lamp in different parts is different. The wall lamp in the home decoration should not only consider the lighting effect, but also the creation of the atmosphere is also an important role of the wall lamp.


Through the above introduction, China String Light Suppliers hopes that you can simply refer to the content of this article in future use.

https://www.nbloyal.com/

4
China Solar Lights Suppliers introduces the cleaning method of solar garden lights:

1. Solar garden lighting is generally dusty. When cleaning, you need to wipe it with a wet towel. The posture should be maintained in the same position. There is no need to rub back and forth. The amplitude should be moderate, especially when looking at ceiling lights and wall lights.

2. Clean the interior of the lighting. When cleaning the light bulb, you need to turn off the light first, and you can take out the light bulb independently for scrubbing. If you clean up the lamp immediately, you don't need to turn the light bulb clockwise to prevent the lamp socket from being screwed too tightly and falling off.

Through the above introduction, China String Light Suppliers hopes that you can simply refer to the content of this article in future use.

5
Low Voltage Outdoor String Lights Factory introduces the cleaning method of courtyard lights:


1. Solar garden lighting is generally dusty. When cleaning, you need to wipe it with a wet towel. The posture should be maintained in the same position. There is no need to rub back and forth. The amplitude should be moderate, especially when looking at ceiling lights and wall lights.

2. Clean the interior of the lighting. When cleaning the light bulb, you need to turn off the light first, and you can take out the light bulb independently for scrubbing.

3. If you clean up the lamp immediately, you don't need to turn the light bulb clockwise to prevent the lamp socket from being screwed too tightly.

Through the above introduction, China Outdoor String Lights Manufacturer hopes that you can simply refer to the content of this article in future use.

6
Low Voltage Outdoor String Lights Factory introduces how to select landscape lights correctly?

1. Lamp quality.
One is the problem that the quality of the lamp itself is too low. The key performance is that some of the light sources used by the landscape lamps are not turned off. Then the sudden change in the current will cause damage during the entire application process, and this This situation is very common. There are many landscape lights that cannot be used due to the damage of the light source, so this kind of light will cause trouble to the city's lighting fixtures, and also become the inconvenience of the city's lighting and maintenance.

2. Lamp quality.
The quality of the raw materials of the landscape lights is poor: many lamp covers turn yellow under the radiant heat of the light source, which harms their beauty and generousness. In addition, as LED modeling lights, they often have to face the corrosion of wind and rain. It is also very easy to be destroyed by human factors, so it is common for people to install some solar garden lights in many ecological parks, and the foundation of solar panels is long gone, so it becomes an unfavorable condition for the beauty of the city.

3. Raw materials of lamps and lanterns.
Raw materials and led luminous flux, etc. lead to poor special effects: The key to this type is due to the raw materials. It does not apply refraction or flooding, which makes the electron optical properties relatively low and cannot achieve the required actual effects.

4. Lamp style.
The landscape lamp style lacks characteristics: some design schemes are very simple in shape design, which makes the style look very ordinary. For such a situation, some competitions and design competitions can arouse a lot of imagination.

Through the above introduction, China Outdoor String Lights Manufacturer hopes that you can simply refer to the content of this article in future use.

7
Garden lights are a kind of outdoor lighting fixtures, usually referring to outdoor road lighting fixtures below 6 meters. Its main components are composed of 5 parts: light source, hundreds of lamps, light poles, flanges, and foundation embedded parts, because garden lights It has the characteristics of diversity, aesthetics and beautification and decoration of the environment, so it is also called landscape garden light. Low Voltage Outdoor String Lights  Manufacturers introduces what kinds of LED garden lights are there?

Since the development of courtyard lights, different types have been derived according to the use environment and design styles, which are divided into three categories: European style courtyard lights, modern courtyard lights, and classical courtyard lights.

1. European-style courtyard lamp: Its design style mostly adopts some European-style artistic elements of European countries, and adds abstract expressions. Such as: Crown courtyard lights.

2. Modern courtyard lamp: its design style mostly adopts modern artistic elements, and adopts simple techniques to express, such as: spring bud courtyard lamp.

3. Classical courtyard lamp: Its design mostly adopts Chinese classical elements, which are used and modified, such as palace lanterns.

Through the above introduction, Outdoor String Lights Manufacturer hopes that you can simply refer to the content of this article in future use.

8
Yard lights are generally installed in residential areas, parks, campuses, villas, and gardens. Yard lights must not only provide lighting but also beautify. Therefore, the design of the courtyard lamp must be beautiful in appearance, and the shape that matches the surrounding environment must be selected. So, Garden Lights Manufacturers  will teach you how to design and install garden lights?
 
1. The grounding wire of the garden light should be set up separately, and the trunk should be arranged along the garden light to form a ring network. When designing, it is necessary to pay attention to the connection points of the main wire and the grounding device. Moreover, the lamps and their grounding branch lines cannot be connected in series, so as to avoid problems with individual lamps, which may cause other lamps to lose grounding protection.

2. The junction box of the garden light must have a waterproof gasket and it must be complete. The position of the street light and the light on the pole must be correct, and it must be firm and reliable. All fasteners must be protected by fuses. In addition, the garden light must be automatically opened and closed according to the brightness of natural light, so the garden light must have such a device.

3. When installing garden lights, you must consider the installation environment, the style and style should be suitable for the installation environment, and the spacing of the garden lights should also be considered carefully, and do not appear too dark or too bright.

Through the above introduction, China Solar Wall Light Manufacturers hopes that you can simply refer to the content of this article in future use.

9
Low Voltage Outdoor String Lights  Manufacturer  introduces the factors that affect the life of outdoor lamps:


1. Ultraviolet rays
Ultraviolet rays have a destructive effect on the wire insulation layer, shell protective coating, plastic parts, potting glue, sealing rubber strips, and adhesives exposed outside the lamp. Aging cracks will appear after a long time, which will damage the waterproof ability of the lamp.

2. High and low-temperature difference
Outdoor summer, the surface temperature of the lamp can rise to 50~60℃ during the day and drop to 10~20℃ at night. In winter, the temperature can drop to below zero on icy and snowy days, and the temperature difference will vary greatly throughout the year. Outdoor lamps and lanterns in summer accelerate the aging and deformation of materials in a high-temperature environment. When the temperature drops below zero in winter, the plastic parts become brittle and are prone to crack under the pressure of ice and snow.

3. Thermal expansion and contraction
The change of temperature causes the thermal expansion and contraction of the lamp. The linear expansion coefficient of different materials of the lamp shell is different, and there will be displacement at the junction of the two materials. As time goes by, the process of thermal expansion and contraction continues to repeat, which will seriously affect the airtightness of the lamp.

Through the above introduction, Solar Fence Post Cap Light Suppliers  hopes that you can simply refer to the content of this article in future use.

10
In the daytime, solar street lights use solar panels to convert solar energy into electrical energy, which is stored in the battery through the solar street light controller, and the controller is used to control the battery to power the street light source at night. Recently, most areas of the country have ushered in successive rainy weather. In this environment, the efficiency of solar street lights to convert solar energy into electrical energy is very low, or even energy conversion. Then Outdoor String Lights Manufacturer will introduce the main reasons why solar street lights do not turn on during rainy days:

1. In the initial planning of solar street lights, it is necessary to consider the use of local solar resources, climate and environment and other conditions for solar street lights to reasonably equip the solar street light system. Before successive rainy days come, it is necessary to plan the electric energy converted by solar panels and the storage of batteries under sufficient light conditions to fully satisfy the local longest continuous rainy and rainy power supply to the street light source. In practice, some manufacturers or suppliers cannot reasonably equip solar street light systems based on local characteristics, or because their customers blindly seek the lowest price, some suppliers have to reduce equipment in order to promote this business. Even rainy days are one of the reasons why the lights are sometimes not turned on.

2. The quality of the lamp cap of the solar street light is not good enough, and the waterproof effect of the lamp cannot be reached. The light source is damaged after the lamp cap enters the water; in addition, nowadays, the solar street lamp is widely used as the LED light source, and its own quality problems will also show that it does not light up.

3. The solar street light controller is damaged. Some controllers are not properly waterproof, and successive rainy days will cause water ingress and damage when inverted. The charging and discharging operation of solar street lights, lighting is completed by solar street light controllers, good quality solar street light controllers, waterproof controllers, etc. should be selected.

4. The wiring is worn, broken, short-circuited, and the terminals are in poor contact. It has a big relationship with the construction quality, so professional construction personnel should be found for construction.

5. The battery is damaged. The quality of the battery is not too hard, and as its capacity decreases, the storage capacity cannot be reached; or the battery is not properly waterproofed, and the cabinet is damaged by water.

6. The location of the solar street light installation is unreasonable. Some solar street light installations in places with dark shadows cause insufficient power generation and long-term loss of batteries, which seriously affects the use and life span. It is necessary to thoroughly study the practical application of solar street lights, according to different areas, reasonably equip solar street light systems, and select high-quality accessories to ensure that solar street lights are always on for 365 days.

 
Through the above introduction, Solar Fence Post Cap Light Suppliers hopes that you can simply refer to the content of this article in future use.


11
Today, the Wholesale Solar Garden Lights Companyis here to teach you how to tell the quality of LED lights.

1. Observe the power factor of the LED lamp. The lower the power factor, the poorer the driving power supply and circuit design used by the LED, which will greatly reduce the service life of the LED lamp.

2. Look at the quality of the lamp bead used by the LED lamp, because the quality of the lamp bead directly determines the quality of the LED lamp, and the quality of the lamp bead determines the quality of the chip and the packaging technology.

3. Look at the light effect of the LED light. If the LED light is the same light bead, the higher the light effect, the higher the brightness; if the brightness is the same, the less power consumption, the LED light The more energy efficient.

4. Look at the heat dissipation of the LED lamp. If the lamp bead is at a high temperature, the light decay will become very large, which will shorten the life of the LED lamp and affect its lighting effect.

Through the above introduction, Garden Lights Manufacturers hopes that you can simply refer to the content of this article in future use.


12
With the continuous expansion of the outdoor string lights market, the public's requirements for products are constantly improving. The outdoor string lights manufacturer https://www.nbloyal.com/product/outdoor-string-lights/ should also constantly learn and understand industry information and professional knowledge.

Structure and properties of raw materials:

1. Chip manufacturers: Top chips mainly come from the United States, Germany, Japan and Korea. This is related to the positioning of manufacturers, market conditions and policies. Different chip manufacturers generally have different stability.

2. Chip size: At present, the chip sizes of advertising light sources are: 9MIL,10MIL,12MIL,14MIL, etc. For the same chip, the larger the size, the higher the brightness, the stronger the bearing capacity, the better the stability, and of course the higher the price.

3. Life span of LED outdoor string lights: The life span of the best LED is only 50,000 hours at present, and the life span of LED chips is different due to the advanced differences of equipment used by packagers in production, technical differences, different packaging forms, different management, and different user usage methods.

4. Quality of circuit board: under the condition of the same LED quality, the quality of circuit board will have an important impact on the life of LED outdoor string lights. Circuit boards are divided into aluminum board, fiberglass board, semi-fiberglass board and paperboard. Aluminum plate has the best quality and the best heat dissipation effect, but the cost is too high. Domestic manufacturers generally only use it on high-power LED products.

We are also a professional solar fence post cap light suppliers, if necessary, please click our website: https://www.nbloyal.com/


13
Solar lighting uses solar energy as energy, realizes photoelectric conversion by solar cells, accumulates and stores electric energy by batteries during the day, and supplies power to electric light sources by controllers at night, thus realizing the required functional lighting. As a renewable energy, solar energy is of great significance to energy construction. With the development of technology, the traditional lights with high energy consumption will be gradually replaced in the wholesale solar garden lights https://www.nbloyal.com/ , and green lighting with energy saving and emission reduction will be realized.

Solar garden light is composed of solar cell module, storage battery, power controller and lighting module.

Advantages of solar garden lights:

1. energy saving: solar photoelectric conversion is used to provide electric energy, which is inexhaustible.

2. Environmental protection: no pollution, no noise and no radiation.

3. Safety: There are absolutely no accidents such as electric shock and fire.

3. Convenient: the installation is simple, and there is no need for stringing or digging construction, and there is no concern about power failure and power limitation.

4. Long service life: The product has high scientific and technological content, and the control system and accessories are international brands, intelligent design and reliable quality.

5. High grade: scientific and technological products, green energy, users attach importance to science and technology, improve the green image and upgrade the grade.

6. Less investment: One-time investment is equivalent to alternating current (alternating current investment starts from substation, incoming power, control box, cable and project), which is one-time investment and long-term benefit.

7. Wide application: solar energy comes from nature, so it can be used in any place with sunshine, especially suitable for green space landscape lighting, high-grade residential and outdoor lighting, coastal landscape lighting and ornament of tourist attractions, street lights of industrial development zones and industrial and mining enterprises, and outdoor lighting of universities.

We are also a professional solar fence post cap light suppliers, if necessary, please click our website: https://www.nbloyal.com/


14
First, the solar path light supplier https://www.nbloyal.com/product/solar-path-lights/ adopts the working principle of collecting and storing solar energy during the day and supplying power at night. It is worth mentioning that solar energy can be collected to the maximum extent and stored in a special storage battery, and the solar energy can be smoothly converted into electric energy, which can be provided to street lights, and the street lights can shine smoothly. In this way, even if it is rainy during the day, the lighting of street lights will not be affected at all, and it can work better.

Second, pollution-free street light facilities play a positive role in the environment. In order to better meet the needs of use, solar path light suppliers have continuously improved the performance of their products by adopting advanced production technology, which has greatly reduced the environmental pollution caused by them. Therefore, up to now, it has a good effect on the natural environment and will never cause any pollution to the environment.

Third, the facilities of solar path lights are very stable and reliable, and it is very simple to maintain. In this way, it can not only save a lot of human resources, but also play a better role in saving investment, which is an ideal light.

The low voltage outdoor string lights is also one of our product, welcome to click our website: https://www.nbloyal.com/


15
You can't judge the quality of outdoor string lights only by looking at their appearance, so outdoor string lights manufacturer https://www.nbloyal.com/product/outdoor-string-lights/ suggest that you need some simple operations to identify them:

1. Compare brightness: attach milky acrylic board to the same number of outdoor string lights, and then slowly lift a short distance to see if the brightness of light beads can meet your own requirements.

2. Comparing the current passing through outdoor string lights: white light is generally < =18-20MA in theory, and others are < =20-25MA. For modules and light strings with extremely high current, such as 25-40MA, I think users should consider their stability.

3. Uniform illumination: When observing white light, we must pay attention to whether there is chromatic aberration, which can be observed by covering it with milky acrylic board. Whether there is chromatic aberration is the most important part to distinguish the quality of white light, and it is also one of the main reasons leading to the price difference.

4. Wire identification: Silicone rubber sleeve, containing copper wires mostly tin-clad copper, with high purity and soft wire body. This is the best wire. Silicone rubber sleeve can resist oxidation for a long time, and tin-coated copper can also prevent oxidation of copper wire and make the wire body soft. More copper wires can pass more current without being burned out by large current.

5. Luminous angle: The same brightness, the larger the angle, the better. At present, the angle is generally 160-180 degrees. Large angles generally need to be made with large chips, and some manufacturers try to achieve an angle of 120-140 degrees in pursuit of brightness. Now, the market requires that the lights can be seen from the side, but the lights can't be seen from the side of the small angle lights.

6. Outdoor string lights light bead temperature: After lighting for a period of time, touch the light bead with your hand. If the temperature is very high or even hot, it is definitely not as stable as the low temperature. You can also look at the circuit board. Modules made of glass fiber are generally better than those made of cardboard.

7. Manufacturing process: How bright is the solder, whether it is full, whether there is virtual soldering, and the serious problem is virtual soldering. After a certain time, poor contact occurs. This affects heat dissipation and sign stability. Then the subsequent maintenance will be troublesome. At present, most small-scale manufacturers of advertising light sources are welded by hand, and the proficiency of workers directly affects the quality.

8. Waterproof treatment: As for the waterproof treatment of outdoor string lights, it is very important to see whether there is glue on the outside of PCB. The identification is also simple, and the skin can be removed. Because of product competition, many factories do not do three-proof treatment for circuit boards and components.

9. PVC shell: A better shell can resist ultraviolet rays, flame retardance, antifreeze and heat resistance. Transparent glue or PVC glue is generally of good quality. If the PVC rubber sleeve of the exposed light has poor elasticity and transparency, it is possible to reuse the nozzle material or have poor quality.

Want to know more about it, the China solar wall light manufacturers will answer your questions. If you are interested in our products, you can click our website: https://www.nbloyal.com/


Pages: [1] 2