Forum s-manuals.com

General Discussion => Service Manuals and Schematics => Topic started by: xiuweetime on 14 February 2020, 09:17:44

Title: Features of ECCA Manufacturer Series Products
Post by: xiuweetime on 14 February 2020, 09:17:44
The ECCA wire is a new type of magnet wire that accepts copper-clad aluminum as the inner conductor. Its characteristics are between copper and aluminum, combining the excellent electrical conductivity of copper and the lightweight of aluminum. Below is an introduction to the ECCA wire by ECCA Manufacturer(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ .

Features of the ECCA line:

1. DC resistivity: The DC resistivity of the copper clad aluminum wire is about 1.45 times that of the pure copper wire; at the same time, the weight of the copper clad aluminum wire is about 1/2 of that of the pure copper wire.

2. Good solderability: The copper-clad aluminum wire is coated with a layer of pure copper concentrically, so it has the same brazability as the pure copper wire, and does not have to be specially treated like the aluminum wire; The copper clad aluminum wire has a thick copper layer to ensure that the soldering performance of the product is not affected when the paint is scraped;

3. Lightweight: The copper-clad aluminum wire density is 1 to 2.5 times that of the pure copper wire with the same diameter, which is very effective for the weight of the low coil; the copper clad aluminum wire can replace the copper wire, which can save at least 30% of the cost.

If you are interested in our products, you can click Aluminum Magnet Wire http://www.xinyu-enameledwire.com/product/paper-covered-rectangular-copperaluminum-wire/ to learn more information.